LED DRL Lighting Kit | Mazda & Mazdaspeed Fog Lights

05/10/2013, 12:39 PM

"put these in my 08 3 and love them
need to find something like these for my high beams
any suggestions"

– gene-o

05/05/2013, 07:21 AM

"No brighter than stock. Irritating to install. "

– Greg

04/11/2013, 08:46 PM

"Disappointed with these. Provide less light than stock. Can hardly tell they are on."

– Jeff Shugg

04/06/2013, 04:40 AM

"Are these socket type H11

>>CorkSport Reply: It depends on which model of car you choose. Mazdas use H11s and 9006 style bulbs."

– Kris

03/15/2013, 08:33 AM

"Got these installed on my 2011 Mazda 3 GT, there are way better then the OEM fog light bulbs for sure, install took no longer then 5min on each side, match my headlights thank you."

– Nigel Krajacic

02/25/2013, 12:50 AM

" Got these for my Mazda2 Touring, I have PIAA H4 extrem white bulbs for my headlamps. The PIAA don't match the LED HID color but they are bright. Lights up sings and road lines perfectly.

"

– Yanis

12/10/2012, 09:49 AM

"These look great! I don't have the stock HID's, so I have Silver Stars for my head lights and high beams. These have the whitish blue LED coloring I've come to expect, and they're brighter than my head lights now! It made me laugh, but they're great! Super fast shipping and an easy install!"

– Mitchell Swift

12/04/2012, 07:16 PM

"Gives a matching look to the headlights and that I love. They dont add much light near as I can tell so far; Finsihed the install today and went for a quick putt. The directions said no tools which is not true. Had to remove wheel well cover and front splash guards to access the bulbs. Also my car has a retaining ring (which is the lock mechanism where you "twist clockwise" to lock the bulb ) had to be loosened becuase the bulbs would not twist and lock in otherwise. What should have been plug and play came with a lot more hassle to install. But I'm still pleased with the end result. Would have rateed it higher except the directions mention no tools needed (-1/2) and no mention of the locking ring (-1/2).
Now...if Corksport would just make that CARB certified air intake for our Mazda3's I would be a happy camper."

– Doug

12/02/2012, 05:43 PM

"Absolutely amazing addition to my Mazda3! The LED's match the HID headlights perfectly. Worth ever penny!
For installation on 2010-2012 Mazda3, turn the wheel all the way to the left (for passenger side) or all the way to the right (for drivers side), use a phillips screwdriver to take out the 3 plastic screws that secure the plastic wheel well. Use the screwdriver tip to pop out the 3 plastic washers, then just pull back the wheel well enough to put your arm into the space. Make sure to push the tab on the blue wire housing to unplug the current bulb, and then twist counterclockwise to remove the bulb. Then just put the new bulb in and reconnect the wires. Super easy install! Only took an extra 10 minutes to figure how to open up the wheel well (due to the plastic washers/tabs).
Thanks corksport!"

– Marsh

11/28/2012, 05:49 PM

"Great replacement to the stock yellow bulbs, they are much more efficient and look significantly better! They are slightly more blue than the stock HIDs on my 07 MS3 GT, but it's barely noticeable.

INSTALLATION for 1st Gen MS3: (I'm merely adding to & correcting Mark's review/install instructions because the CorkSport supplied instructions are utterly useless)
Turn your wheel all the way and undo the 2 phillips screws connecting the black plastic to the fender infront of the wheel. Bend it back just enough to get your arm in (I recommend wrapping a towel around your arm because i cut my arm up pretty bad reaching in there), and you'll be able to see the passenger side fog lamp with a flashlight. Unclip the bulb, turn it to the right and pull out, do not force it, just jiggle. Then place the new bulb in, slightly turned to the right (same position you removed the stock bulb in). This requires patience because it can be hard to line it up correctly. Plug it back in and test it before returning the 2 screws.

For the drivers side, you'll do the same except you won't be able to see the fog lamp due to a piece of plastic. You'll have to reach under the blocking piece of plastic there and feel where the bulb is and repeat above steps.

Took me 10 mins to figure out!
"

– John Barrett

Pages: 1 2

New post

New features

Manufacturer: CorkSport

Country:

State/Province:

Zip/postal code:

Get rates

Add a functional modern style to your Mazda with the CorkSport LED Fog Lighting Kit. With an output similar to that of most HID light kits in the 6000k color range, the CorkSport LED Fog Light kit replaces the incandescent fog lights with the modern sleek look of blue/white LED’s.

The CorkSport Advantage:

Kit includes 2 bulbs: 23 LED’s in each. 20 on the sides and three on the top
6000k Color Range: Each bulb is 6000-7000k. Very white with just a hint of blue
Easy to install: Upgrade your lighting with no custom adapters or wiring required
Generate less heat: LED’s have a lower power draw* and longer life than standard bulbs
CorkSport Service and Support: Receive full color installation instructions, all of the needed installation hardware and knowledgeable telephone support

CORKSPORT Fog Light Kit

New post

New features

Categories

My Account